#include <SegLCD_PCF85176_2Row4DigSigBatPwr.h>

Inheritance diagram for SegLCD_PCF85176_2Row4DigSigBatPwr:

Public Member Functions
	SegLCD_PCF85176_2Row4DigSigBatPwr (SegTransportI2C &transport, uint8_t address=DEFAULT_PCF85176_I2C_ADDRESS, uint8_t subaddress=DEFAULT_SUBADDRESS)

void	init () override
	Logical display sections that can be targeted by higher-level rendering logic.

void	setBatteryLevel (uint8_t value)

void	setSignalLevel (uint8_t value)

void	setPowerSymbol (bool state, uint8_t index=0)

size_t	write (uint8_t ch) override

Public Member Functions inherited from SegDriver_PCF85176
	SegDriver_PCF85176 (SegTransportI2C &transport, uint8_t address=DEFAULT_PCF85176_I2C_ADDRESS, uint8_t subaddress=DEFAULT_SUBADDRESS)
	Constructor for PCF85176 segment driver.

Public Member Functions inherited from SegDriver_PCx85
	SegDriver_PCx85 (SegTransportI2C &transport, uint8_t address, uint8_t subaddress)
	Constructor for PCx85 segment driver.

void	bankSelect (uint8_t input, uint8_t output)
	Select bank for input and output.

void	blink (BlinkFrequency blink=BLINK_FREQUENCY_OFF, BlinkMode mode=BLINK_MODE_NORMAL)
	Set blink frequency and mode.

void	on () override
	Turn the display on.

void	off () override
	Turn the display off.

void	command (uint8_t) override
	Send RAW command to controller.

void	flush (uint8_t startAddr, uint8_t length) override
	Flush specific range of buffered changes to the display.

virtual void	flush ()
	Flush all buffered changes to the display.

virtual void	flush (uint8_t startAddr, uint8_t length)
	Flush specific range of buffered changes to the display.

Public Member Functions inherited from SegLCDLib
virtual	~SegLCDLib ()
	Virtual destructor to ensure proper cleanup in derived classes.

virtual void	clear ()
	Clear all visible segments on the display.

void	home ()
	Set cursor to 0, 0 without clear display.

virtual void	setCursor (uint8_t row, uint8_t col)
	Set cursor on exact digit.

void	initBacklight (int8_t backlightPin, BacklightMode backlightMode=BACKLIGHT_DIGITAL, bool backlightActiveHigh=true)
	Initialize GPIO backlight control.

virtual void	setBacklight (bool state)
	Set backlight state (on/off).

virtual void	setBacklight (int brightness)
	Set backlight brightness (0-255).

void	setAutoFlush (bool enable)
	Enable or disable autoflush mode.

bool	getAutoFlush () const
	Get current autoflush state.

const uint8_t *	getRamBuffer () const
	Get pointer to internal RAM buffer (read-only).

size_t	getRamBufferSize () const
	Get size of internal RAM buffer in bytes.

Private Member Functions
void	_setDecimal (uint8_t row, uint8_t col, bool state) override
	Virtual method for setting decimal point.

bool	_handleDotNoPrevClear (uint8_t ch)

uint8_t	_mapSegmentsRow1 (uint8_t val)

uint8_t	_mapSegmentsRow2 (uint8_t val)

Static Private Attributes
static constexpr uint8_t	ADDR_POWER = 6

static constexpr uint8_t	ADDR_SIGNAL = 14

static constexpr uint8_t	ADDR_BATT = 16

static constexpr uint8_t	ADDR_1_SEGS = 0

static constexpr uint8_t	ADDR_2_SEGS = 8

static constexpr uint8_t	RAM_SIZE = 9

static constexpr uint8_t	OFFSET_POWER = ADDR_POWER / 2

static constexpr uint8_t	OFFSET_SIGNAL = ADDR_SIGNAL / 2

static constexpr uint8_t	OFFSET_BATT = ADDR_BATT / 2

static constexpr uint8_t	OFFSET_ROW1 = ADDR_1_SEGS / 2

static constexpr uint8_t	OFFSET_ROW2 = ADDR_2_SEGS / 2

static constexpr uint8_t	ROW1 = 0

static constexpr uint8_t	ROW2 = 1

static constexpr uint8_t	DECIMAL_POINT_BIT_ROW1 = 0x01

static constexpr uint8_t	DECIMAL_POINT_BIT_ROW2 = 0x08

static constexpr uint8_t	DECIMAL_MIN_ROW = 0

static constexpr uint8_t	DECIMAL_MAX_ROW = 1

static constexpr uint8_t	DECIMAL_MIN_COL = 0

static constexpr uint8_t	DECIMAL_MAX_COL = 3

static constexpr int8_t	DECIMAL_COL_OFFSET = -1

static constexpr uint8_t	MAX_BATTERY_LEVEL = 4

static constexpr uint8_t	BATTERY_MASK = 0xF0

static constexpr uint8_t	BATTERY_LEVEL_SEG [MAX_BATTERY_LEVEL] = {0x80, 0x20, 0x40, 0x10}

static constexpr uint8_t	MAX_SIGNAL_LEVEL = 1

static constexpr uint8_t	SIGNAL_MASK = DECIMAL_POINT_BIT_ROW2

static constexpr uint8_t	SIGNAL_LEVEL_BITS [MAX_SIGNAL_LEVEL] = {DECIMAL_POINT_BIT_ROW2}

static constexpr uint8_t	POWER_BIT = DECIMAL_POINT_BIT_ROW1

Additional Inherited Members
Public Types inherited from SegDriver_PCx85
enum	ModeStatus { MODE_STATUS_BLANK = 0 , MODE_STATUS_ENABLED = 1 }
	Enable/disable display. More...

enum	BlinkFrequency { BLINK_FREQUENCY_OFF = 0 , BLINK_FREQUENCY_1 = 1 , BLINK_FREQUENCY_2 = 2 , BLINK_FREQUENCY_3 = 3 }
	Set blink frequency. More...

enum	BlinkMode { BLINK_MODE_NORMAL = 0 , BLINK_MODE_ALTRAM = 1 }
	Set blink mode. More...

Public Types inherited from SegLCDLib
enum	BacklightMode { BACKLIGHT_DIGITAL , BACKLIGHT_PWM }
	Backlight mode for GPIO control. More...

Protected Member Functions inherited from SegDriver_PCx85
void	_setMode (ModeStatus status, ModeDrive drive=MODE_DRIVE_14, ModeBias bias=MODE_BIAS_13)
	Set the mode of the display.

void	_writeRam (uint8_t *data, size_t length, uint8_t address=0) override
	Low-level method to write a data buffer to display RAM.

void	_writeRam (uint8_t data, uint8_t address=0)
	Low-level method to write a single byte to display RAM.

virtual void	_writeRam (uint8_t *data, size_t length, uint8_t address)=0
	Low-level method to write a data buffer to display RAM.

Protected Member Functions inherited from SegLCDLib
void	_setFlag (uint8_t mask)
	Set a specific flag bit.

void	_clearFlag (uint8_t mask)
	Clear a specific flag bit.

bool	_isFlagSet (uint8_t mask) const
	Check if a specific flag bit is set.

void	_clearAllFlags ()
	Clear all flags.

bool	_dotWrite (uint8_t ch, int8_t minCol, int8_t maxCol, int8_t ramOffset)
	Write decimal point.

void	_dotClearCur (int8_t minCol, int8_t maxCol)
	Clear current decimal (overwrite).

void	_colonClearIfNotFlagged (uint8_t ch, uint8_t colonCol, uint8_t colonFlag)
	Clear colon if its flag is not set.

virtual void	_setColon (uint8_t, uint8_t, bool)
	Virtual method for setting colon.

void	_allocateBuffer (size_t size)
	Allocate RAM buffer for display data.

void	_writeRamMasked (uint8_t data, uint8_t address, uint8_t mask=0xFF)
	Write to display RAM with nibble-aware masking support.

void	_writeRam (uint8_t data, uint8_t address=0)
	Low-level method to write a single byte to display RAM.

uint8_t	_get_char_value (char ch)
	Helper method to convert a character to its segment representation.

uint16_t	_get_16char_value (char ch)
	Helper method to convert a character to its 16-segment representation.

Protected Attributes inherited from SegLCDLib
bool	_autoFlush = true
	Autoflush mode enabled flag (default: true for LCD API 1.0 compatibility).

int8_t	_backlightPin = -1
	Backlight GPIO pin (-1 if disabled)

BacklightMode	_backlightMode = BACKLIGHT_DIGITAL
	Backlight mode (DIGITAL or PWM)

bool	_backlightActiveHigh = true
	Backlight active high flag.

uint8_t	_backlightBrightness = 0
	Cached backlight brightness.

uint8_t	_displayFlags = 0
	LEDC channel for old ESP32 Arduino Core (2.0.x)

uint8_t *	_ramBuffer = nullptr
	Dynamic RAM buffer for display data (allocated by derived classes).

size_t	_ramBufferSize = 0
	Size of allocated RAM buffer in bytes.

uint8_t	_cursorRow = 0
	Current Row.

uint8_t	_cursorCol = 0
	Current Column.

Static Protected Attributes inherited from SegDriver_PCx85
static constexpr uint8_t	DEFAULT_PCF85176_I2C_ADDRESS = 0x38

static constexpr uint8_t	DEFAULT_SUBADDRESS = 0x00

static constexpr uint8_t	MAX_ADDRESS = 39
	Last valid start HW nibble address for byte write on a single PCx85 device.

Static Protected Attributes inherited from SegLCDLib
static constexpr uint8_t	FLAG_PENDING_DOT = 0x80
	Common flag for decimal handling when RAM offset is 0.

Constructor & Destructor Documentation

◆ SegLCD_PCF85176_2Row4DigSigBatPwr()

SegLCD_PCF85176_2Row4DigSigBatPwr::SegLCD_PCF85176_2Row4DigSigBatPwr	(	SegTransportI2C &	transport,
		uint8_t	address = `DEFAULT_PCF85176_I2C_ADDRESS`,
		uint8_t	subaddress = `DEFAULT_SUBADDRESS`
	)

Member Function Documentation

◆ _handleDotNoPrevClear()

bool SegLCD_PCF85176_2Row4DigSigBatPwr::_handleDotNoPrevClear ( uint8_t ch )

private

◆ _mapSegmentsRow1()

uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::_mapSegmentsRow1 ( uint8_t val )

private

◆ _mapSegmentsRow2()

uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::_mapSegmentsRow2 ( uint8_t val )

private

◆ _setDecimal()

void SegLCD_PCF85176_2Row4DigSigBatPwr::_setDecimal	(	uint8_t	,
		uint8_t	,
		bool
	)

overrideprivatevirtual

Virtual method for setting decimal point.

Each LCD has its own implementation with HW specifics. Default implementation is empty (no-op).

Reimplemented from SegLCDLib.

◆ init()

void SegLCD_PCF85176_2Row4DigSigBatPwr::init ( )

overridevirtual

Logical display sections that can be targeted by higher-level rendering logic.

Initialize the display driver, clear display and set position to 0,0.

Reimplemented from SegDriver_PCx85.

◆ setBatteryLevel()

void SegLCD_PCF85176_2Row4DigSigBatPwr::setBatteryLevel ( uint8_t value )

◆ setPowerSymbol()

void SegLCD_PCF85176_2Row4DigSigBatPwr::setPowerSymbol	(	bool	state,
		uint8_t	index = `0`
	)

◆ setSignalLevel()

void SegLCD_PCF85176_2Row4DigSigBatPwr::setSignalLevel ( uint8_t value )

◆ write()

size_t SegLCD_PCF85176_2Row4DigSigBatPwr::write ( uint8_t ch )

overridevirtual

Reimplemented from SegLCDLib.

Field Documentation

◆ ADDR_1_SEGS

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ADDR_1_SEGS = 0

staticconstexprprivate

◆ ADDR_2_SEGS

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ADDR_2_SEGS = 8

staticconstexprprivate

◆ ADDR_BATT

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ADDR_BATT = 16

staticconstexprprivate

◆ ADDR_POWER

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ADDR_POWER = 6

staticconstexprprivate

◆ ADDR_SIGNAL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ADDR_SIGNAL = 14

staticconstexprprivate

◆ BATTERY_LEVEL_SEG

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::BATTERY_LEVEL_SEG[MAX_BATTERY_LEVEL] = {0x80, 0x20, 0x40, 0x10}

staticconstexprprivate

◆ BATTERY_MASK

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::BATTERY_MASK = 0xF0

staticconstexprprivate

◆ DECIMAL_COL_OFFSET

constexpr int8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_COL_OFFSET = -1

staticconstexprprivate

◆ DECIMAL_MAX_COL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_MAX_COL = 3

staticconstexprprivate

◆ DECIMAL_MAX_ROW

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_MAX_ROW = 1

staticconstexprprivate

◆ DECIMAL_MIN_COL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_MIN_COL = 0

staticconstexprprivate

◆ DECIMAL_MIN_ROW

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_MIN_ROW = 0

staticconstexprprivate

◆ DECIMAL_POINT_BIT_ROW1

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_POINT_BIT_ROW1 = 0x01

staticconstexprprivate

◆ DECIMAL_POINT_BIT_ROW2

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::DECIMAL_POINT_BIT_ROW2 = 0x08

staticconstexprprivate

◆ MAX_BATTERY_LEVEL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::MAX_BATTERY_LEVEL = 4

staticconstexprprivate

◆ MAX_SIGNAL_LEVEL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::MAX_SIGNAL_LEVEL = 1

staticconstexprprivate

◆ OFFSET_BATT

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::OFFSET_BATT = ADDR_BATT / 2

staticconstexprprivate

◆ OFFSET_POWER

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::OFFSET_POWER = ADDR_POWER / 2

staticconstexprprivate

◆ OFFSET_ROW1

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::OFFSET_ROW1 = ADDR_1_SEGS / 2

staticconstexprprivate

◆ OFFSET_ROW2

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::OFFSET_ROW2 = ADDR_2_SEGS / 2

staticconstexprprivate

◆ OFFSET_SIGNAL

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::OFFSET_SIGNAL = ADDR_SIGNAL / 2

staticconstexprprivate

◆ POWER_BIT

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::POWER_BIT = DECIMAL_POINT_BIT_ROW1

staticconstexprprivate

◆ RAM_SIZE

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::RAM_SIZE = 9

staticconstexprprivate

◆ ROW1

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ROW1 = 0

staticconstexprprivate

◆ ROW2

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::ROW2 = 1

staticconstexprprivate

◆ SIGNAL_LEVEL_BITS

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::SIGNAL_LEVEL_BITS[MAX_SIGNAL_LEVEL] = {DECIMAL_POINT_BIT_ROW2}

staticconstexprprivate

◆ SIGNAL_MASK

constexpr uint8_t SegLCD_PCF85176_2Row4DigSigBatPwr::SIGNAL_MASK = DECIMAL_POINT_BIT_ROW2

staticconstexprprivate

The documentation for this class was generated from the following files:

Public Member Functions

Private Member Functions

Static Private Attributes

Additional Inherited Members

Constructor & Destructor Documentation

◆ SegLCD_PCF85176_2Row4DigSigBatPwr()

Member Function Documentation

◆ _handleDotNoPrevClear()

◆ _mapSegmentsRow1()

◆ _mapSegmentsRow2()

◆ _setDecimal()

◆ init()

◆ setBatteryLevel()

◆ setPowerSymbol()

◆ setSignalLevel()

◆ write()

Field Documentation

◆ ADDR_1_SEGS

◆ ADDR_2_SEGS

◆ ADDR_BATT

◆ ADDR_POWER

◆ ADDR_SIGNAL

◆ BATTERY_LEVEL_SEG

◆ BATTERY_MASK

◆ DECIMAL_COL_OFFSET

◆ DECIMAL_MAX_COL

◆ DECIMAL_MAX_ROW

◆ DECIMAL_MIN_COL

◆ DECIMAL_MIN_ROW

◆ DECIMAL_POINT_BIT_ROW1

◆ DECIMAL_POINT_BIT_ROW2

◆ MAX_BATTERY_LEVEL

◆ MAX_SIGNAL_LEVEL

◆ OFFSET_BATT

◆ OFFSET_POWER

◆ OFFSET_ROW1

◆ OFFSET_ROW2

◆ OFFSET_SIGNAL

◆ POWER_BIT

◆ RAM_SIZE

◆ ROW1

◆ ROW2

◆ SIGNAL_LEVEL_BITS

◆ SIGNAL_MASK